Philips RFX9400/93 Manual de usuario descargar pdf (Pagina 19)

ENGLISH

RFX9400 Starter’s Guide

Configuring the Extender through a Router

When the Extender is already installed and connected to external A/V equipment, it is possible

to configure it through a router via a straight Ethernet cable. It is not possible to configure the

Extender wireless via the router.

1 Connect the Extender to the router, and the router to the PC, as indicated below.

2 Set the Extender’s

Configuration switch to 3.

3 Open the ProntoEdit Professional

on the PC.

4 In the Tools menu, select Extender

Discovery.

The Extender Discovery tool appears,

with a list of all the detected Extenders in the Pronto Network.

5 Select the Extender that you want to configure and click on the Configure button.

The Configuration Tool opens in the browser.

6 Finalize the configuration, as described in the instructions on page 5.

Installing the Extender

Warning Keep the Extender away from heat sources such as amplifiers.

Before connecting the Extender to external A/V equipment,

make sure that the antenna is placed correctly.

Connecting the Extender to A/V equipment

For the Extender to transmit an IR signal, you need to connect it to the A/V component via the IR

Output on the back of the Extender. In contrast to previous Philips Extenders, the RFX9400 has no IR

blaster.

To connect the Extender to A/V equipment, use one of the following cables enclosed with the

Extender:

• a Dual IR emitter;

Place the

antenna in an

upright position.

Extender

Straight

Ethernet cable

Router

Insert the mini-jack

connector of the Dual

IR emitter in the IR

output of the Extender.

Attach the

emitter to the

infrared receiver

of the A/V

component.

Tip When the Extender is not recognized by the Extender Discovery tool, configure the Extender

directly with the configuration cable, as described on page 5.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Philips RFX9400/93 Manual de usuario Pagina 19

Comentarios a estos manuales