Philips CSS5330B/12 Manual de usuario descargar pdf (Pagina 15)

13EN

3 Select and play audio les or music on

your NFC device.

• To break the connection, tap again the

NFC device onto the NFC tag on this

product.

Auto standby

When playing media from a connected device,

this product automatically switches to standby

after 15 minutes of button inactivity and no

audio/video play from a connected device.

Apply factory settings

You can reset this product to the default

settings programmed at the factory.

1 In AUX mode, on the remote control

press Volume -, BASS -, and TREBLE - in

sequence within three seconds.

» When the factory settings restore is

complete, the product automatically

switches off and restarts.

5 Update software

To get the best features and support, update

your product with the latest software.

Check software version

In HDMI ARC source, on the remote control

press TREBLE -, BASS -, and Volume - in

sequence within three seconds.

» The software version number is displayed

on the display panel.

Update software via USB

Caution

•

Do not turn off the power or remove the USB ash

drive when the software update is in progress because

you might damage this product.

1 Check the latest software version on

www.philips.com/support.

• Search for your model and click on

"Software and drivers".

2 Download the software into a USB ash

drive.

a Unzip the download if zipped, and

makesurethattheunzippedle

containstwoles:"CSS5330.bin"and

"RPT5330.bin"(ifavailable).

b Putthetwoles("CSS5330.bin"and

"RPT5330.bin"(ifavailable))inthe

rootdirectoryoftheUSBashdrive.

3 Connect the USB ash drive to the

SERVICE (USB) connector on this product.

4 Switch this product to HDMI ARC source

(press HDMI ARC).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios