
14
Instructions
Istruzioni
www.philips.com/support
EN
Empty the drip tray and the
co ee grounds drawer.
Remove the “INTENZA+” water lter
from the water tank if it was installed
and replace it with the small white
original one.
Pour the entire descaling
solution
Fill the water tank with fresh water up to the calc
clean level and place it back in the machine.
IT
Vuotare la vasca raccogli-
gocce e il cassetto raccogli-
fondi.
Estrarre il ltro acqua “INTENZA+”
(se presente) dal serbatoio dell'ac-
qua e sostituirlo con il ltrino bianco
originale.
Versare tutta la soluzione
decalci cante.
Riempire il serbatoio con acqua fresca no al li-
vello calc clean e reinserirlo.
EN
Place a large container (1.5l)
under the dispensing spout.
Press and hold the
button for at least 3 seconds
to start the descaling cycle. The
“ ”
button ashes
throughout the cycle.
If the
light turns on. The descaling solution will be dis-
pensed at intervals (this takes about 25 min).
IT
Posizionare un contenitore
capiente (1,5l) sotto sotto
l'erogatore.
Premere il tasto
per almeno 3 sec. avviare il ciclo
di decalci cazione. Il tasto
“ ”
lampeggia per tutta
la durata del ciclo.
Si accende il led
. La soluzione decalci cante sarà ero-
gata ad intervalli (durata: circa 25 min).
EN
When the icon light shines, the water tank is empty.
Rinse the water tank and ll
it up to the MAX level with
fresh water.
Empty the drip tray and
place it back.
Empty the container and
place it back.
IT
Quando si accende il simbolo , il serbatoio dell'acqua
è vuoto.
Risciacquare il serbatoio e
riempirlo con acqua fresca
no al livello MAX.
Vuotare la vasca raccogli-
gocce e reinserirla in posi-
zione.
Vuotare il contenitore e
reinserirlo in posizione.
2
1
2
1
CALC
CLEAN
MAX
Comentarios a estos manuales