Philips PPX2340-F7 Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 25
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Connect to the Playback Device 11
5 Connect to the Playback Device
Only use the supplied cable or cables that are available
as accessories to connect the projector.
Supplied Cables
Video-(CVBS) cable (PPX2340)
Connecting to a Computer
(PPX2340)
Installing the Software
1 Close all open programs and applications before
beginning the installation process.
2 Connect the device with a USB connection of your
computer.
3 Select PicoPix 2340 as drive in the Windows
Explorer and start the program Picopix Fun Viewer
Setup_Windows.exe or Picopix Fun Viewer
Setup_MAC.hqx according to the OS being used.
4 Your computer will now prepare for the installation
process. Follow the instructions of the installation
wizard and restart the computer.
5 The software has been installed and you will find the
icon PicoPix Fun Viewer on the desktop.
Start Projection
1 Connect the USB plug of the Pocket Projector with
a free USB connection of your computer.
2 Start the software PicoPix Fun Viewer by double
clicking on the icon on the desktop.
3 Follow the instructions of the Software to start with
the projection.
Connecting using Audio/
Video (CVBS) Adaptor
Cable
(PPX2340)
Use the projector's audio/video cable (A/V cable) to
connect camcorders, DVD players or digital cameras.
The jacks for these devices are yellow (video), red
(audio right) and white (audio left).
1 Connect the supplied A/V cable to the Ï input of
the projector.
2 Connect the video device's audio/video jacks to the
A/V cable using a conventional composite video
(RCA) cable.
3 Select Menu > Source and switch to AV.
Connecting to Mobile Multimedia Devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Note
Disconnect the Device from the
Computer
Disconnect the device from the computer
before restarting. This could cause the
computer to boot from the Pocket Projec-
tor being recognised as a USB storage
device.
Note
Switching to the Multimedia Device Sig-
nal Output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Comentarios a estos manuales

Sin comentarios