Philips Clock Radio AJ3600 Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 18
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
SLEEP
(See 6)
About Sleep
This set has a built-in sleep timer, which enables the radio to be automati-
cally switched off after a set period of time. There are four sleep time
options.
Setting and switching off SLEEP
1 Within 1 second,
press
ALARM RESET / SLEEP
twice until the display
shows
SLEEP and SL: 60
.
The radio is automatically switched on and tunes to the last station.
2 To select other sleep time options, press ALARM RESET / SLEEP
again
within 1 second before the display returns to clock time.
The display shows in sequence: SL : 30, SL : 15 and OFF.
3
To cancel sleep, press either:
RADIO ON/OFF
REPEAT
ALARM /
BRIGHTNESS CONTROL.
ALARM RESET / SLEEP
once or more until
SLEEP
disappears
from the display.
USING THE PROJECTION
You may have the experience of looking for a clock in the darkness.
With this projection feature, you can conveniently project the clock time
onto a surface e.g. walls ceiling (furniture, glasses not recommended).
1 Press PROJECTION ON/OFF
to switch on.
The Projection lens lights up red.
2 Turn the Projection lens wheel (maximum 180 degree left or right) and
also the set, if necessary, to find a suitable projection surface.
(See
7
)
3 To change the projected time upside down, press REVERSE
PROJECTION.
4. To change the projection slightly to a different angle, turn the ROTATE
PROJECTION ball (maximum 60 degree left or right.).
5. Press PROJECTION ON/OFF to switch off.
The Projection lens goes out.
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18

Comentarios a estos manuales

Sin comentarios