Philips 191E2SB-00 Manual de usuario descargar pdf (Pagina 41)

7.1 Troubleshooting

This page deals with problems that can be

corrected by a user. If the problem still persists

after you have tried these solutions, contact Philips

customer service representative.

Common Problems

No Picture (Power LED not lit)

• Makesurethepowercordispluggedinto

the power outlet and into the back of the

monitor.

• First,ensurethatthepowerbuttononthe

front of the monitor is in the OFF position,

then press it to the ON position.

No Picture (Power LED is White)

• Makesurethecomputeristurnedon.

• Makesurethesignalcableisproperly

connected to your computer.

• makesurethemonitorcablehasnobent

pins on the connect side. If yes, repair or

replace the cable.

• TheEnergySavingfeaturemaybeactivated

Screen says

• Makesurethemonitorcableisproperly

connected to your computer. (Also refer to

the Quick Set-Up Guide).

• Checktoseeifthemonitorcablehasbent

pins.

• Makesurethecomputeristurnedon.

AUTO button doesn't function

• Theautofunctionisapplicableonlyin

VGA- Analog mode. If the result is not

satisfactory, you can do manual adjustments

via the OSD menu.

Note

The Auto Function is not applicable in

DVI-Digital mode as it is not necessary.

Visible signs of smoke or sparks

• Donotperformanytroubleshootingsteps

• Disconnectthemonitorfrommainspower

source immediately for safety

• ContactwithPhilipscustomerservice

representative immediately.

Imaging Problems

Image is not centered

• Adjusttheimagepositionusingthe“Auto”

function in OSD Main Controls.

• AdjusttheimagepositionusingthePhase/

Clock of Setup in OSD Main Controls. It is

valid only in VGA mode.

Image vibrates on the screen

• Checkthatthesignalcableisproperlysecurely

connected to the graphics board or PC.

Vertical flicker appears

• Adjusttheimageusingthe“Auto”function

in OSD Main Controls.

• EliminatetheverticalbarsusingthePhase/

Clock of Setup in OSD Main Controls. It is

valid only in VGA mode.

7 Troubleshooting & FAQs

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47

Comentarios a estos manuales

Sin comentarios

Philips 191E2SB-00 Manual de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Philips 191E2SB-00