Philips ISYSTEM LPC2138 Manual de usuario

_ V1.4 User’s Guide Philips LPC2138 Target Board  iSYSTEM, December 2005 1/16 Ordering code ITLPC2138 Dimensions 100 x 96 mm Fi

Schematic Note: On-board integrated debugger is not part of the schematic.  iSYSTEM, December 2005 10/16

Licensing the on-board integrated debugger A 30-days evaluation period starts after the debugger (winIDEA) connects to the ITLPC2138 for the first tim

Use of the on-board integrated debugger Follow below instructions, in order to get a sample application running with “out of the box” experience. All

Use of an external debugger An external debugger can be:  a JTAG debugger, which connects to a 20-pin P3 connector  a development tool supporting

Troubleshooting The flash boot loader code is executed every time the CPU is powered or reset. The loader can execute the ISP command handler or the u

Notes:  iSYSTEM, December 2005 15/16

Disclaimer: iSYSTEM assumes no responsibility for any errors which may appear in this document, reserves the right to chang

Contents Contents... 2 Intr

Introduction Philips LPC2138 Target Board is an evaluation and a development system for Philips ARM7TDMI-S based LPC2138 microcontroller. The ITLPC213

Block Diagram Figure 3: ITLPC2138 Block diagram Notes 1. The board provides 16-pin connector for the optional LCD display (type CMC216x04), whic

Components List Name Description P1 Connector for manufacturing purpose P2 ETM Trace connector P3 JTAG debug connector P4 USB connector (integrat

Power Supply The target board is powered from the PC USB port, through which winIDEA (IDE) running on a PC, connects to the on-board integrated debugg

Connectors DB9 male connector UART1 (P5) Pin No. Symbol 2 RxD 3 TxD 5 GND The serial port is configured as a standard 3-wire interface. Cro

16-pin LCD connector (J21) Top View Pin Assignment for Crystal Clear technology CMC216x04 LCD Pin No. Symbol Function 1 GND Ground Terminal 2 Vdd

38-pin Mictor JTAG Debug & ETM Trace Connector (P2) Signal Pin Pin Signal Not used 1 2 Not used Not used 3 4 Not used GND 5 6 TRACECLK Not